Our BHEX is a heavy duty, vandal resistant, Ligature Resistant Surface Wall Mount LED exit sign designed for high-performance and long-life. This is the perfect EXIT SIGN solution for correctional and/or behavioral health facilities, schools, and any public area where strength and safety is paramount. A .125″ clear polycarbonate lens is sealed to the doorframe.

ELECTRICAL: 624nm Red or 527nm Green LED light source. Electrical components mounted to removable high impact, injection molded polycarbonate chassis.

LISTINGS: ETL and cETL listed. Damp location. Meets IK10 requirement, higher ratings available, consult factory. Meets or exceeds UL924 and NFPA 101 Standards. Meets or exceeds CSA and NRCAN requirements.

FASTENERS: T25 Torx with center pin reject is standard.

HOUSING: One-piece die-formed prime 14-gauge grade material as specified – see ordering information. Corners continuously seam welded and smooth with no post grinding (TIG).

DOOR: One-piece die-formed prime grade 14-gauge. Corners continuously seam welded and smooth with no post grinding (TIG).

FINISH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. See Options for black exterior.

OPTIONS: Sealed emergency battery pack with standard deep cycle battery conditioning (provides 90 minutes of emergency operation), plus self test and self diagnostic circuitry available. The emergency battery pack is suitable for 10°C to 45°C (50°F to 113°F), and a cold weather battery option is available.

WARRANTY: 5 – Year Limited Warranty. Complete warranty and terms located at: www.aelnow.com/warranty.

Cross: www.aelnow.com/babswm